Chapter 11: Biochar Production

In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the main product, with heat and electrical energy as co-products of secondary interest. The reasons for this are as follows: when producing biochar, heat is the simplest form of energy to capture and utilize, electrical energy can be generated from heat energy with a wide range of available technologies small and large; rather than immediately combusting the gases released from biomass, there is potential to refine the gases into bio-oil and syngas. However, much larger investments of capital are needed to build facilities for which gaseous fuel production is the primary goal, as compared to those focused on biochar production with heat and electrical energy co-products. While the economic viability of biochar production will be improved by production of high-value co-products (e.g., wood acids for use in pesticides), the simplest production scheme is one in which biochar and heat are the primary products. Here we aim to provide a broader overview of thermochemical processes and technologies most relevant to biochar production in its current state of commercialization. All biochar is a result of pyrolysis (the reaction) but not all biochar is made with a dedicated pyrolysis reactor (the technology type). Further, all biochar is the result of a lack of complete combustion (the reaction), even biochar produced in a combustion or gasification reactor (the technology type). This is an important distinction to acknowledge in the following sections in which we discuss both thermochemical conversion reactions and technology types.