Development of Risk Mitigation Guidance for Sensor Placement Inside Mechanically Ventilated Enclosures - Phase 1

Andrei Tchouvelev, William Buttner, Daniele Melideo, Daniele Baraldi, Benjamin Angers

Research output: Contribution to conferencePaper


Guidance on Sensor Placement was identified as the top research priority for hydrogen sensors at the 2018 HySafe Research Priority Workshop on hydrogen safety in the category Mitigation, Sensors, Hazard Prevention, and Risk Reduction. This paper discusses the initial steps (Phase 1) to develop such guidance for mechanically ventilated enclosures. This work was initiated as an international collaborative effort to respond to emerging market needs related to the design and deployment equipment for hydrogen infrastructure that is often installed in individual equipment cabinets or ventilated enclosures. The ultimate objective of this effort is to develop guidance for an optimal sensor placement such that, when integrated into a facility design and operation, will allow earlier detection at lower levels of incipient leaks, leading to significant hazard reduction. Reliable and consistent early warning of hydrogen leaks will allow for the risk mitigation by reducing or even eliminating the probability of escalation of small leaks into large and uncontrolled events. To address this issue, a study of a real-world mechanically ventilated enclosure containing GH2 equipment was conducted, where CFD modelling of the hydrogen dispersion (performed by AVT and UQTR, and independently by the JRC) was validated by the NREL Sensor laboratory using a Hydrogen Wide Area Monitor (HyWAM) consisting of a 10- point gas and temperature measurement analyzer. In the release test, helium was used as a hydrogen surrogate. Expansion of indoor releases to other larger facilities (including parking structures, vehicle maintenance facilities and potentially tunnels) and incorporation into QRA tools, such as HyRAM is planned for Phase 2. It is anticipated that results of this work will be used to inform national and international standards such as NFPA 2 Hydrogen Technologies Code, Canadian Hydrogen Installation Code (CHIC) and relevant ISO/TC 197 and CEN documents.
Original languageAmerican English
Number of pages20
StatePublished - 2019
EventICHS 2019: International Conference on Hydrogen Safety - Adelaide, Australia
Duration: 24 Sep 201926 Sep 2019


ConferenceICHS 2019: International Conference on Hydrogen Safety
CityAdelaide, Australia

NREL Publication Number

  • NREL/CP-5400-73721


  • HySafe
  • NFPA 2
  • safety
  • sensor


Dive into the research topics of 'Development of Risk Mitigation Guidance for Sensor Placement Inside Mechanically Ventilated Enclosures - Phase 1'. Together they form a unique fingerprint.

Cite this