Influence of Surface Preparation on Scanning Kelvin Probe Microscopy and Electron Backscatter Diffraction Analysis of Cross Sections of CdTe/CdS Solar Cells

H. R. Moutinho, R. G. Dhere, C. S. Jiang, M. M. Al-Jassim

Research output: Contribution to conferencePaperpeer-review

2 Scopus Citations

Abstract

Electron backscatter diffraction (EBSD) provides information on the crystallographic structure of a sample, while scanning Kelvin probe microscopy (SKPM) provides information on its electrical properties. The advantage of these techniques is their high spatial resolution, which cannot be attained with any other techniques. However, because these techniques analyze the top layers of the sample, surface or cross section features directly influence the results of the measurements, and sample preparation is a main step in the analysis. In this work we investigated different methods to prepare cross sections of CdTe/CdS solar cells for EBSD and SKPM analyses. We observed that procedures used to prepare surfaces for EBSD are not suitable to prepare cross sections, and we were able to develop a process using polishing and ion-beam milling. This process resulted in very good results and allowed us to reveal important aspects of the cross section of the CdTe films. For SKPM, polishing and a light ion-beam milling resulted in cross sections that provided good data. We were able to observe the depletion region on the CdTe film and the p-n junction as well as the interdiffusion layer between CdTe and CdS. However, preparing good-quality cross sections for SKPM is not a reproducible process, and artifacts are often observed.

Original languageAmerican English
Pages57-62
Number of pages6
DOIs
StatePublished - 2012
Event2011 MRS Spring Meeting - San Francisco, CA, United States
Duration: 25 Apr 201129 Apr 2011

Conference

Conference2011 MRS Spring Meeting
Country/TerritoryUnited States
CitySan Francisco, CA
Period25/04/1129/04/11

Bibliographical note

See NREL/CP-5200-51629 for preprint

NREL Publication Number

  • NREL/CP-5200-53220

Other Report Number

  • Paper No. 1324-D14-02

Keywords

  • cross sections
  • EBSD
  • solar cells
  • solar energy

Fingerprint

Dive into the research topics of 'Influence of Surface Preparation on Scanning Kelvin Probe Microscopy and Electron Backscatter Diffraction Analysis of Cross Sections of CdTe/CdS Solar Cells'. Together they form a unique fingerprint.

Cite this