Abstract
The hot-wall vacuum evaporation system is finally coming down to operating condition and the first films are expected in early December. An apparent correlation between the low-temperature barrier height associated with a grain boundary in CdTe and the angle of mismatch between the two grains has been observed. Improved capacitance of grain boundary measurements should yield defect densities.
Original language | American English |
---|---|
Number of pages | 20 |
State | Published - 1981 |
Bibliographical note
Work performed by Department of Materials Science and Engineering, Stanford University, Stanford, CaliforniaNREL Publication Number
- SERI/PR-9330-1-T4
Other Report Number
- SERI/PR-9330-1-T4
Keywords
- CdTe films
- evaporated
- single crystal
- solar