Abstract
The environmental challenges associated with food production can be addressed via the thermochemical upcycling of agro-industrial biomass. Two such methods, hydrothermal carbonization (HTC) and pyrolysis, can be coupled to first reduce the water content of wet biomass wastes by producing a hydrochar (HC) via HTC and then a bio-oil via pyrolysis of the HC. However, HTC of biomass results in the formation of secondary char (SC), an amorphous tar-like mixture resulting from organic compounds released into the aqueous phase that adsorb, recondense and polymerize on the parent biomass. This study investigated how HTC temperature impacts the formation of SC from apple pomace and the SC's subsequent impact on fast pyrolysis products. HCs were produced at temperatures of 175 degrees C, 200 degrees C, and 250 degrees C. Lower HTC temperatures favor the formation of biorefinery platform chemicals such as 5-hydroxymethylfurfural and levulinic acid, while higher temperatures result in increased lignin degradation products (i.e., phenolics). HCs were subjected to fast pyrolysis before and after SC extraction in two analytical pyrolysis instruments. Fast pyrolysis of HC produced compounds similar to those found in SC, but with variations in CO and CO2 emissions. The combination of SC extraction and fast pyrolysis demonstrates promise for recovering value-added compounds from agro-industrial waste biomass while retaining a solid char for fuel and carbon management.
Original language | American English |
---|---|
Number of pages | 9 |
Journal | Journal of Analytical and Applied Pyrolysis |
Volume | 185 |
DOIs | |
State | Published - 2025 |
NREL Publication Number
- NREL/JA-5100-92252
Keywords
- fast pyrolysis
- hydrochar
- hydrothermal carbonization
- molecular beam mass spectrometry (MBMS)
- primary char
- secondary char