Superconducting (TlBi)0.9Sr1.6Ba0.4Ca2Cu3Ag0.2Ox Films from Electrodeposited Precursors

R. N. Bhattacharya, P. A. Parilla, R. D. Blaugher, Z. F. Ren, W. Li, J. H. Wang, Y. T. Wang, A. M. Hermann, M. Paranthaman, A. Goyal, D. T. Verebelyi, D. K. Christen

Research output: Contribution to journalArticlepeer-review

8 Scopus Citations

Abstract

A low-cost electrodeposition (ED) method is reported for fabrication of high-temperature Tl-oxide-based superconductors. Recent studies on the development of biaxially textured ED films on single-crystal and rollingassisted biaxially textured Ni substrates are presented. Polefigure measurements of electrodeposited (Tl, 8i)-(Sr, Ba)-CaCu-Ag-O (TBSBCCO) films, with thicknesses between 1-5 urn, clearly show strong biaxial texturing. The rocking curve and phi scan of TBSBCCO on 300 A Ag/LaAIO3, show a full width half maximum (FWHM) of only 0. 9° and 1. 2°, respectively, consistent with a very high-quality film. Transport measurements for the ED films show Jc values up to 7. 84 x 105 A/cmz at 77 K in zero magnetic field. The preliminary results of electrodeposited TBSBCCO film on CeOz/YSZ/CeOz on textured Ni showed primarily 1212 phase with a transport critical current density of 1. 36 x 10s A/cm1 at 77 K in zero field.

Original languageAmerican English
Pages (from-to)1681-1683
Number of pages3
JournalIEEE Transactions on Applied Superconductivity
Volume9
Issue number2 PART 2
DOIs
StatePublished - 1999

NREL Publication Number

  • NREL/JA-590-27915

Fingerprint

Dive into the research topics of 'Superconducting (TlBi)0.9Sr1.6Ba0.4Ca2Cu3Ag0.2Ox Films from Electrodeposited Precursors'. Together they form a unique fingerprint.

Cite this